Dura-Bar^® Cast Iron Available from Industrial Tube and Steel

Dura-Bar^® continuous cast iron offers similar properties to steel tubing but with a higher quality machining, better thermal conductivity and a reduced cost to comparable steel products.

Industrial Tube and Steel offers stock and custom Dura-Bar® cast iron products available in:

• Grades of Gray Iron G2 and Ductile Iron 65-45-12 and 80-55-06
• Solid rounds ranging from 5/8” to 20” in diameter
• Tubing available in G2 with sizes from 1.50” x 3.5” (ID x OD) to 7” x 9”
• Squares, rectangles and plate stock available in G2 and Ductile grades
• 72” nominal lengths (varies depending on diameter)
• Available in an as-cast state as well as a centerless ground version

Reduce Your Machining Costs with Dura-Bar Plus

Dura-Bar products have always been considered the most machinable cast iron due to strict control of the process variables applied to its continuous casting. Recently, extensive tool life tests by independent machine shops and the University of Alabama, Birmingham have been used to establish even tighter control limits on the continuous casting process. The result is an improved Dura-Bar Plus.

Dura-Bar Plus is engineered iron designed to meet the most critical requirements. Manufactured to strict process controls, Dura-Bar Plus provides world-class quality and uncompromising consistency.

Dura-Bar Plus helps increase profit margins by machining more parts per hour, decreasing cycle time and increasing profitability. It all adds up to a lower cost per part.

Dura-Bar Plus helps:

• Optimize machining speeds and feeds
• Lower tooling costs
• Decrease downtime for tooling changes
• Reduce scrap

Dura-Bar Plus is available in:

• G2 gray iron
• 65-45-12 Ductile Iron Square
• 80-55-06 Ductile Iron
• 100-70-02 Ductile Iron

For more information about the Dura-Bar cast iron products available from Industrial Tube and Steel, call us toll free 800-662-9567.

Grades of Cast Iron Stocked at Industrial Tube & Steel

Dura-Bar Applications and Properties